occupation

1565Currently online
181Today's Reading
27Share Today
Multilingual display

Understand the problem of toilet seepage

2018-04-05 04:48:15

We all have small problems in life. For example, the phenomenon of water seepage in the bathroom, under normal circumstances, we will find maintenance personnel to carry out maintenance at home, and will not think of trying to solve it themselves. Therefore, today Xiaobian will introduce the problem of water seepage in the bathroom. Let's get to know!

Tools/Materials
1

Rest room

2

Worker

Methods/Steps
1

First, what is the cause of water seepage in the bathroom, and how can it be better treated? Water seepage is generally divided into two situations: ground seepage or water damage resulting in water seepage. (1) Ground water seepage is in the case of water, begins to leak, and will be alleviated when the use of water is stopped. (2) Water is divided into upper water and lower water. The water seepage is continuous, and there is even a tendency to increase the amount of leakage, but after the water main valve is turned off, it will be improved. (3) Whether the water seepage can be verified by flushing the faucet to the floor drain and the way the toilet is pumped, if the leakage becomes obvious at this time, it means that the water leakage.

2

(1) Clean the ground and keep it dry for the treatment of the following steps. (2) All the parts that will come into contact with water, such as the floor tile surface, the floor tile joint, the wall tile surface, the wall tile joint and the side of the water should be sprayed evenly again with water repellent. It should be noted that the waterproof agent must be permeable, which can not only be waterproof and anti-corrosion, but also make the service life of the concrete. (3) Wait until the waterproof agent is dry, and fill the brick joints and some damaged parts with caulking agent, and the cement parts around the water can be reinforced twice. (4) It is best to use plastic steel mud to make a waterproof edge for some parts that are easy to accumulate water such as the corner and the water root.

3

Test (1) Block all the floor drains, and then lay a step at the door, about 25 centimeters. (2) Then fill the bathroom with water and make a mark. (3) Wait 24 hours to see if the water has dropped significantly from the marked place, and then go to the downstairs bathroom to see if the ceiling has seeped. (4) Shower water on the bathroom wall and check whether there is water seepage on the back of the wall.

4

This page is taken from experience without authorization

5

In fact, the water leakage problem and the construction of hydropower is very closely related, because hydropower is the foundation and the key, so the decoration is not to choose cheap or find irresponsible workers, we must check carefully, so as to be foolproof in order to stay, otherwise the water leakage will not only affect their own but also affect the downstairs.

Matters needing attention
1

Try not to look for a meal plan

2

Multiple contrast

Recommendation